Paint Correction Stage 1 - 3 & ceramic

Service Description

The full process starts with a deep clean of the wheels, moving on to the body of the vehicle with a pre was followed by a contact clean. We the employ the use of an iron & fallout remover followed by a clay bar treatment to remove contamination from the vehicles paintwork. We move the vehicle inside the unit to tape up & prep which is where the machine polishing begins. Depending on your selected service which should be based on the outcome you desire, you vehicle will receive the following. A single stage paint enhancement; The use of a Dual Action machine polisher will be used around the entire vehicle with our choice of pad & compound we find best suited for your vehicle to remove up to 70% / 80% of micro marring (swirls), bird dropping etchings & minor defects while enhancing your vehicles paint with a stunning gloss. This is finished with our 2 year CQUK paint ceramic coating included in the price. A multi stage correction; Typically, this is a 2 stage paint correction eg. A cutting phase & a finishing stage. For the more discerning finish we may use a 2 stage dual action process or we would look at employing the use of the infamous rotary polishers for our cutting stage. A little more aggression towards the clear coat to take more defects out such as those deeper marks, heavier swirling & small scratches. This achieve up to 90% of defects removed with the inclusion of some scratches removed dependent on depth while adding a glossy finish topped with a 2 year CQUK paint ceramic coating. The trifecta of paint correction, the use of some wet sanding to target deeper scratches & sanding marks removed (clear coat thickness checked). Followed with a multistage correction around the rest of the vehicle to remove up to 99% of defects (paint dependant) finished with our 2 year CQUK paint ceramic coating. If booked please note the vehicle needs to be brought to our work shop for the work to be carried out. Due to the nature of the work we will need to have the vehicle in for a minimum of 2 days with the consideration of ceramic curing time. We unfortunately cannot provide courtesy vehicle so transport should be arranged.